![]() uuu -v -b emmc_all imx-boot-imx8qxpmek-sd.bin b2qt-automotive-qt5-image-imx8qxpmek.imgįinally Boot2Qt boots fine and I can see Neptune starting, but when I try to modify the U-Boot enviroment variables, somehow the boot partition gets corrupted. $ bitbake -k b2qt-automotive-qt5-image.bbĪfter a while the image is generated, then I use the NXP manufacturing tool to flash it to the eMMC that MEK board includes: sudo. b2qt-init-build-env init -device imx8qxpmek Looks like uboot is trying to work with MMC while I’m booting from sdcard.I am working with NXP i.MX 8QuadXPlus Multisensory Enablement Kit (MEK) and I'd like to use Boot2Qt so I created Boot2Qt distro using this guide, the steps I did are: $ git clone -b thud git://code.qt.io/yocto/meta-boot2qt.git Model: Freescale i.MX6 ULL 14x14 EVK Board MENDER_IMAGE_BOOTLOADER_FILE = "u-boot.imx" | ERROR: Execution of '/home/ux/imx8/yocto/zeusl/core-base-build/tmp/work/x86_64-linux/u-boot-tools-native/1_2020.01-r0/temp/run.do_compile.11196' failed with exit code 1:ĮRROR: Task (virtual:native:/home/ux/imx8/yocto/zeusl/sources/meta-mender/meta-mender-core/recipes-bsp/u-boot/u-boot-tools_2020.01.bb:do_compile) failed with exit code '1'īy adding the following lines to the nf file, MENDER_IMAGE_BOOTLOADER_BOOTSECTOR_OFFSET = "2" | WARNING: exit code 1 from a shell command. | make: *** No rule to make target 'sandbox_defconfig'. | DEBUG: Executing shell function do_compile WARNING: exit code 1 from a shell command.ĮRROR: Logfile of failure stored in: /home/ux/imx8/yocto/zeusl/core-base-build/tmp/work/x86_64-linux/u-boot-tools-native/1_2020.01-r0/temp/log.do_compile.11196 Make: *** No rule to make target 'sandbox_defconfig'. The error log is appended for your reference. But during build I receive the following error: No rule to make target 'sandbox_defconfig’ ![]() ![]() I’m trying to integrate Mender into Yocto zeus version for i.MX 8mm EVK.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |